Plastics Industry News
繁體 | 简体
Technology
Applications
MAAG PUMP SYSTEMS AG
Main > Daily Market News > Article Content
| Print | Submit Article |
Last Page | More | Next Page
At Fakuma 2018, an all-electric e-cap 380 is set to manufacture 26 mm caps including tamper-proof bands at a cycle time of under 2 seconds.
At Fakuma 2018, an all-electric e-cap 380 is set to manufacture 26 mm caps including tamper-proof bands at a cycle time of under 2 seconds.

ENGEL will demonstrate a further reduction in cycle times for the production of caps at the Fakuma trade fair in Friedrichshafen, Germany, from 16 to 20 October 2018, An all-electric ENGEL e-cap 2440/380 will be used to produce 26 mm caps, including tamper-proof bands made of HDPE, at a cycle time of under 2 seconds under realistic manufacturing conditions.

Optimised movement profiles allow for an increased output: The ENGEL e-cap 380 with 3,800 kN of clamping force can provide a dry cycle time of just 1.4 seconds.

Lightweight caps require greater precision and repeatability.

The ENGEL e-cap is a leading cap machine on the market providing all-electric operation with a clamping force range as high as 4,200 kN. At the same time, it is an energy-efficient machine in its class. Despite its substantial output, the e-cap due to be showcased at Fakuma only needs around 0.4 kWh of electricity to process a kilogram of plastic granulate.

At the fair, a 72-cavity mould from z-moulds (Dornbirn, Austria) will be used. As far as peripheral units, the exhibit will include a dry air system from Blue Air Systems (Kundl, Austria) and a camera inspection system from IMDvista (Brügg, Switzerland).

Alongside energy efficiency, the all-electric e-cap machine's features include extreme precision. This ensures the greatest possible number of good parts, even in the production of demanding lightweight caps.

As a system solutions provider, ENGEL delivers fully-integrated and automated manufacturing cells around the world from a single source. Efficiency potential is maximised and overall energy consumption kept to a minimum where the injection moulding machine, mould and peripheral systems are properly coordinated from the start of the project.

Related Articles  
IMM manufacturers to boost the upswing market
CPRJ Direct: The show time of injection mo...
Fakuma 2018: ENGEL provides more flexibili...
PolyOne introduces new chemical foaming ad...
Husky to present comprehensive injection m...
K 2019: Milliken enhancing plastics with “...
Related Supplier
震雄营销(深圳)有限公司
KAUTEX MASCHINENBAU GMBH & ...
HOSOKAWA ALPINE AG ABT. FVF
KIEFEL GMBH
WINDMÖLLER & HÖLSCHER
CHUAN LIH FA MACHINERY WORK...
We are collecting readers' comment for improving our website. If you are willing to help, please CLICK HERE to complete a survey. Your comments matter.
Write a mail to the editor
Copyright © Adsale Publishing Limited. Any party needs to reprint any part of the content should get the written approval from Adsale Publishing Ltd and quote the source "China Plastic & Rubber Journal (CPRJ)", Adsale Plastics Website - www.AdsaleCPRJ.com. We reserve the right to take legal action against any party who reprints any part of this article without acknowledgement. For enquiry, please contact Editorial Department.  [Want to use this report?]
Name
Company Name
Job title
Email (will not be published)
Comment
Recent Comment
Legal Statement | Privacy Policy
Remarks: Publication of the comments is at editor's discretion.
Register a New Member
阿科玛(中国)投资有限公司上海分公司
东莞市思为客自动化科技股份有限公司
DAVIS-STANDARD, LLC
Automotive conf.
大东树脂化学股份有限公司
莱斯特瑞兹机械(太仓)有限公司
上海ABB工程有限公司
Medical conf.
艾尔发集团
COPERION GMBH
泰瑞机器股份有限公司
万华化学(烟台)销售有限公司
东华机械有限公司
广东伊之密精密机械股份有限公司
海天塑机集团有限公司
信易电热机械股份有限公司
裕克施乐塑料制品(太仓)有限公司
富强鑫精密工业股份有限公司
欧瑞康巴尔查斯涂层(苏州)有限公司
日钢注塑机維修(深圳)有限公司

Supplier Highlights