Plastics Industry News
繁體 | 简体
Technology
Applications
MAAG PUMP SYSTEMS AG
Main > Daily Market News > Article Content
| Print | Submit Article |
Last Page | More | Next Page
The HASCO Hot Half H4400/… is a fully tested and proven complete package.
The HASCO Hot Half H4400/… is a fully tested and proven complete package.

HASCO recently presented the HASCO Hot Half H4400/… which is ready for immediate use.

The HASCO Hot Half H4400/… is a fully tested and proven complete package which ensures that users are always on the safe side. It comes fully equipped with all the hot runner components and nozzles, as well as the clamping, bolster and nozzle retainer plates, plus the standard components and connectors, and is, therefore, ready for immediate use.

Reliable production can start immediately once the simple process of connecting the Hot Half to the control and supply peripherals has been completed. In addition to checking the mould-specific dimensions, all the drive and connection components are tested to ensure that they are functioning properly. All the test results, documented in the corresponding test reports, are included in the delivery.

The Hot Halves are additionally equipped with a USB 2.0 data storage device which contains all the available information, such as drawings, parts lists and measurement protocols. This has the advantage that the data is always on the Hot Half, regardless of where the mould is currently being used, and can thus always be called up directly.

As an information storage device to accompany the mould, the Screw Memory A5805 can be used to archive all the mould and/or article-specific data directly in your mould. It can then be read out at any time without any need for a data cable.

In addition to the labels for connector assignment, which are permanently affixed with slotted pins, a system-specific nameplate based on the A6500/… is now supplied with each Hot Half. The white-coated aluminium nameplate is individually printed with the system and customer-relevant data and covered with magnetic film.

The two available sizes can be positioned either directly on the Hot Half or at a clearly visible point on the injection moulding machine. The hot runner system can then be identified at a glance. This is particularly important in the case of rapid mould changes during hot production phases.

The Hot Half concept allows mouldmakers and injection moulders to considerably shorten design and production times for hot runner moulds. HASCO assumes the full manufacturing risk for the H4400/... Hot Half and, through its finely tuned assembly of the nozzles and its precise alignment of all the parts, ensures a leak-free system with perfectly functioning components.

Related Articles  
Hasco introduces new ejector pin Z410/… wi...
Hasco brings wide array of innovations for...
HASCO introduces SmartLock slide retainer ...
Synventive introduces a new generation of ...
HRSflow introduces tailor-made hot runner ...
HRSflow’s compact technology for low-heigh...
Related Supplier
CHUAN LIH FA MACHINERY WORK...
震雄营销(深圳)有限公司
震雄营销(深圳)有限公司
信易电热机械有限公司
We are collecting readers' comment for improving our website. If you are willing to help, please CLICK HERE to complete a survey. Your comments matter.
Write a mail to the editor
Copyright © Adsale Publishing Limited. Any party needs to reprint any part of the content should get the written approval from Adsale Publishing Ltd and quote the source "China Plastic & Rubber Journal (CPRJ)", Adsale Plastics Website - www.AdsaleCPRJ.com. We reserve the right to take legal action against any party who reprints any part of this article without acknowledgement. For enquiry, please contact Editorial Department.  [Want to use this report?]
Name
Company Name
Job title
Email (will not be published)
Comment
Recent Comment
Legal Statement | Privacy Policy
Remarks: Publication of the comments is at editor's discretion.
Register a New Member
Medical conf.
东华机械有限公司
泰瑞机器股份有限公司
3C conf
COPERION GMBH
广东伊之密精密机械股份有限公司
莱斯特瑞兹机械(太仓)有限公司
欧瑞康巴尔查斯涂层(苏州)有限公司
阿科玛(中国)投资有限公司上海分公司
DAVIS-STANDARD, LLC
日钢注塑机維修(深圳)有限公司
裕克施乐塑料制品(太仓)有限公司
Automotive conf.
信易电热机械股份有限公司
海天塑机集团有限公司
富强鑫精密工业股份有限公司
东莞市思为客自动化科技股份有限公司
上海ABB工程有限公司
万华化学(烟台)销售有限公司
艾尔发集团
Pack conf

Supplier Highlights