• News
  • eNews
  • Connections
  • Specials
  • Videos
  • Events
  • Event Calendar
BOY to present a strong lineup at Fakuma 2021
Source:Adsale Plastics Network    Editor:JK    Date:26.Jul.2021

At Fakuma 2021, BOY will show its new products from its product program. The machine manufacturer located in Neustadt-Fernthal will present four injection molding machines on its stand. Four more BOY injection molding machines are on booths of partner companies.

 

"At this year's trade fair presentation, we put more focus on the individual automation and digitalization of our injection molding machines" pointed out Alfred Schiffer, Managing Partner of Dr. Boy GmbH & Co. KG. Three of the four interesting applications are equipped with BOY's own LR 5 linear handling system.

 

BOY will present a fully automated production cell - a BOY 80 E hybrid in combination with a BOY 2C S produces wine spouts. In addition to the energy-efficient servo drive, the BOY 80 E is also equipped with an optional electro-mechanical drive for the injection unit (eSP).

 

The rotational and axial movements of the servo-plastic unit are carried out by two servo-motors totally detached from the machine hydraulics. The finished injection-molded two-component plastic part is removed by the handling LR 5 and is then transported to an ultrasonic welding-system where a plastic-decanting-insert is shrink-wrapped into the wine spout.


1_web.jpg

BOY will be participating in Fakuma 2021.


The biggest of the BOY injection molding machines - a BOY 125 E with six contact points, a clamping force of 1,250 kN and a footprint of only 5.22 m² - demonstrates its capability with the production of stacking boxes.

 

In just 17 seconds, the 77 g stacking boxes are injected, removed from the mold by the gripper hand of the BOY handling LR 5 and transported to a printer. After labeling, the stacking boxes are placed on an integrated conveyor belt.

 

Dental protective caps are produced on a BOY 35 E from a two-component liquid silicone. The vertically compact telescopic handling unit BOY LR 5 removes the LSR-protective caps from a four-cavity mold and places them onto a conveyor belt.

 

The four-tie-bar injection molding machine scores with 350 kN clamping force, a generously dimensioned two-platen clamping unit and favorable machine hour rates.

 

The specialist for injection molding machines in the clamping range from 63 to 1250 kN presents on a 25 E a removal handling system that is fully integrated under the safety gate of the machine.

 

In the medical-technical application, the side parts of a breathing mask are removed from the mold by a picker and placed on a small conveyor belt that is also integrated under the safety gate. This automated device is with a footprint of only 1.9 m².

Like

0

Leave A Comment

Submit

All Comments

Articles You'll Like