Stratasys Ltd., a leader in polymer 3D printing solutions, is providing the public with baseline material qualification data for Antero 840CN03 filament material in collaboration with Lockheed Martin and Metropolitan State University of Denver.

The release of this qualification data allows those in the industry to use the material for additively manufactured aerospace parts, such as those on the Orion spacecraft, using Stratasys production-grade 3D printers.

“We want to demonstrate a new model for how industry, manufacturers and academia can collaborate to gather and release material qualification data that helps accelerate the adoption of additive manufacturing across the aerospace industry,” brought up Foster Ferguson, Director of Aerospace of Stratasys.

Designed for space-ready performance, Antero 840CN03 is a blended and functionalized PEKK-based high-performance, ESD thermoplastic composite material developed specifically for production-grade Stratasys FDM 3D printers that meets ESD performance and NASA outgassing requirements while also exceeding the flame, smoke, and toxicity (FST) characteristics required for aviation applications.

Hatch cover for the Orion spacecraft by Lockheed Martin printed in Antero840CN03. (Photo: Business Wire)

During this first phase of qualification, a baseline set of data was collected by printing over 280 test coupons in Antero 840CN03 on Stratasys Fortus F900 3D printers at Lockheed Martin in Littleton, Colo., and Stratasys Direct Manufacturing in Belton, Texas.

Coupons were tested for tensile strength properties which is a key mechanical property for design. Data collected confirmed the high performance of the Antero material as well as the consistent mechanical properties which have been previously shown in academic studies. Future phases of testing will expand to additional relevant properties, giving design engineers additional data to work with in applying Antero to other part types and environments.

“We are continually looking for ways to drive innovation for flight-qualified materials and additive manufacturing is key to that endeavor,” said Cris Robertson, Associate Manager of Advanced Manufacturing at Lockheed Martin Space. “Through our collaboration with Stratasys and MSU Denver, we have collected the data necessary to qualify Antero 840CN03 for flight parts and we are now able to expand our use of the material beyond our initial applications on the Orion vehicle.”

MSU Denver is educating and training the manufacturing workforce of the future using additive and subtractive manufacturing that can reduce costs and increase application capabilities.

“These types of research and development collaborations with leading companies like Stratasys and Lockheed Martin enable our students to be well prepared to help their future aerospace employers with adopting the latest technology in the industry,” commented Mark Yoss, Director of the Advanced Manufacturing Sciences Institute at MSU Denver.

Stratasys and Lockheed Martin previously worked together to collect and release material characteristics data. Most recently in 2018, as members of America Makes, the companies released allowable data for SABIC ULTEM 9085 resin printed on a Stratasys Fortus 900mc 3D printer.

By continuing to publicly release material qualification data, the companies hope to enable further adoption of additive manufacturing in aerospace applications and use-cases. Further material testing will take place in future phases providing for full characterization of this material.

Stratasys Ltd., a leader in polymer 3D printing solutions, is providing the public with baseline material qualification data for Antero 840CN03 filament material in collaboration with Lockheed Martin and Metropolitan State University of Denver.

The release of this qualification data allows those in the industry to use the material for additively manufactured aerospace parts, such as those on the Orion spacecraft, using Stratasys production-grade 3D printers.

“We want to demonstrate a new model for how industry, manufacturers and academia can collaborate to gather and release material qualification data that helps accelerate the adoption of additive manufacturing across the aerospace industry,” brought up Foster Ferguson, Director of Aerospace of Stratasys.

Designed for space-ready performance, Antero 840CN03 is a blended and functionalized PEKK-based high-performance, ESD thermoplastic composite material developed specifically for production-grade Stratasys FDM 3D printers that meets ESD performance and NASA outgassing requirements while also exceeding the flame, smoke, and toxicity (FST) characteristics required for aviation applications.

Hatch cover for the Orion spacecraft by Lockheed Martin printed in Antero840CN03. (Photo: Business Wire)

During this first phase of qualification, a baseline set of data was collected by printing over 280 test coupons in Antero 840CN03 on Stratasys Fortus F900 3D printers at Lockheed Martin in Littleton, Colo., and Stratasys Direct Manufacturing in Belton, Texas.

Coupons were tested for tensile strength properties which is a key mechanical property for design. Data collected confirmed the high performance of the Antero material as well as the consistent mechanical properties which have been previously shown in academic studies. Future phases of testing will expand to additional relevant properties, giving design engineers additional data to work with in applying Antero to other part types and environments.

“We are continually looking for ways to drive innovation for flight-qualified materials and additive manufacturing is key to that endeavor,” said Cris Robertson, Associate Manager of Advanced Manufacturing at Lockheed Martin Space. “Through our collaboration with Stratasys and MSU Denver, we have collected the data necessary to qualify Antero 840CN03 for flight parts and we are now able to expand our use of the material beyond our initial applications on the Orion vehicle.”

MSU Denver is educating and training the manufacturing workforce of the future using additive and subtractive manufacturing that can reduce costs and increase application capabilities.

“These types of research and development collaborations with leading companies like Stratasys and Lockheed Martin enable our students to be well prepared to help their future aerospace employers with adopting the latest technology in the industry,” commented Mark Yoss, Director of the Advanced Manufacturing Sciences Institute at MSU Denver.

Stratasys and Lockheed Martin previously worked together to collect and release material characteristics data. Most recently in 2018, as members of America Makes, the companies released allowable data for SABIC ULTEM 9085 resin printed on a Stratasys Fortus 900mc 3D printer.

By continuing to publicly release material qualification data, the companies hope to enable further adoption of additive manufacturing in aerospace applications and use-cases. Further material testing will take place in future phases providing for full characterization of this material.