Innovia Films is launching RayoForm EUP60, a white BOPP film for in-mold labeling (IML). Produced in Europe at one of the company's state-of-the art production facilities, EUP60 is a high opacity and high yield product, having a density as low as 0.55 g/cm3.

Combined with its specially formulated and printable matte surface, EUP60 is engineered to give good high-speed sheet feeding and adhesion for both UV and oxidative inks.

EUP60 is designed with special features that make it suitable for different shapes of container or lid without risk of distortion to the container or lid. This film is applicable for small-to-medium size, thin or thick wall PP or PE containers, providing a tactile ‘soft-touch’ finish after molding. 

Innovia Films creates RayoForm EUP60 BOPP film for in-mold labeling.

It also means a finished, polyolefin mono-material container can be produced, making the final pack fully recyclable, and meeting the Plastic Recyclers Europe packaging design recommendations.

“As well as the technical performance of EUP60, we can produce reels for the customer that are longer than anything else in the marketplace," Alasdair McEwen, Product Manager, Labels, Innovia Films, told. "More linear meters in a reel leads to less changeovers and improved printing efficiency, with printing speeds of up to 14,000 sheets per hour being realized. This applies to either roll-to-roll or roll-to-sheet conversion processes and customers can choose either horizontal or large diameter vertical reel packing, depending on their requirements.”

The large diameter rolls that Innovia can supply, means less roll changes and higher efficiencies for converters as well as a dramatic reduction in packaging waste.

Innovia Films is launching RayoForm EUP60, a white BOPP film for in-mold labeling (IML). Produced in Europe at one of the company's state-of-the art production facilities, EUP60 is a high opacity and high yield product, having a density as low as 0.55 g/cm3.

Combined with its specially formulated and printable matte surface, EUP60 is engineered to give good high-speed sheet feeding and adhesion for both UV and oxidative inks.

EUP60 is designed with special features that make it suitable for different shapes of container or lid without risk of distortion to the container or lid. This film is applicable for small-to-medium size, thin or thick wall PP or PE containers, providing a tactile ‘soft-touch’ finish after molding. 

Innovia Films creates RayoForm EUP60 BOPP film for in-mold labeling.

It also means a finished, polyolefin mono-material container can be produced, making the final pack fully recyclable, and meeting the Plastic Recyclers Europe packaging design recommendations.

“As well as the technical performance of EUP60, we can produce reels for the customer that are longer than anything else in the marketplace," Alasdair McEwen, Product Manager, Labels, Innovia Films, told. "More linear meters in a reel leads to less changeovers and improved printing efficiency, with printing speeds of up to 14,000 sheets per hour being realized. This applies to either roll-to-roll or roll-to-sheet conversion processes and customers can choose either horizontal or large diameter vertical reel packing, depending on their requirements.”

The large diameter rolls that Innovia can supply, means less roll changes and higher efficiencies for converters as well as a dramatic reduction in packaging waste.