Log in
onclick="gourl('https://www.adsalecprj.com/en/auth/register.html')" v-if="!userInfo.id"> Register
Contact
{{userInfo.company_name_english||userInfo.truename_english}}
{{userInfo.phone||userInfo.email}}

Home Page

Member Center

Data Settings

Log out

 
Recycling

OUKE: One shredder platform for lithium battery, wind blade, and mixed waste

Oct 13, 2026

Solid waste is complex, hard, and abrasive. Standard shredders wear out fast, use high energy, and stop often — leaving downstream recyclers with inconsistent feedstock.


OUKE builds shredders that handle multiple material types on one platform: traditional solid waste, retired lithium batteries, and wind turbine blade composites. The company treats shredding as a controlled materials-preparation process, producing "standard feedstock" that downstream equipment can accept directly.


OUKE_1_480.jpg

One platform, multiple materials


OUKE's shredders handle traditional streams — metallurgy, cardboard, rubber, chemicals — plus two harder ones: retired lithium batteries and wind turbine blade composites.


For lithium batteries, the company developed a high-torque shredding system with specialty tooling and an intelligent explosion-proof control system.


For wind blades, OUKE developed a heavy-duty anti-winding shear shredding system for large glass- and carbon-fiber composites, producing uniform recycled fiber granules. Two deployment modes — fixed line and mobile on-site processing — reduce the cost of transporting large blades.


OUKE_2_480.jpg

Self-developed blades


OUKE's base in Bowang Town, Anhui — a cluster of 2,000+ blade and machine-tool companies — gives it a full heat-treatment and assembly supply chain nearby.


The company controls alloy composition, blade geometry, machining, and heat treatment in-house, then customizes wear-, impact-, and corrosion-resistant sets for each material type. Matching blades to machine parameters improves crushing efficiency and output uniformity while cutting maintenance and parts costs.


The machine structure targets the common failure modes: blade jamming, material winding, overload, and uneven particle size.


Certifications and installations


OUKE's lithium battery explosion-proof lines hold EU CE, EMC, and RoHS certifications. Complete lines are installed in Vietnam, Malaysia, Thailand, Saudi Arabia, and the UAE, including 10,000-ton-scale projects in Southeast Asia with recovery rates above 98%. 


OUKE states its equipment costs over 40% less than comparable European or American imports, with 30% lower operating costs.


About the CRRE exhibitor


OUKE has focused on shredder R&D and manufacturing for over ten years. It holds 21 patents and offers strong non-standard customization.


Booth: B1C17


About CRRE


CRRE is positioned as a national-level platform, with deep integration across the whole chain and broad international collaboration. It adopts a “summit forum + physical exhibition” dual-engine model. It is committed to building the first five-in-one super hub for resource-circulation in the Asia-Pacific region, covering: recycling – reprocessing – high-value applications – green finance – international rules.


Preregistration:

https://reg.crre-expo.com/CRRE/visitor-registration/eng?Regsource=RAZ23777


CRRE
Recycling
Shredder
Comments
Recycling
Mixing efficiency, sealing, corrosion resistance, and continuous operation determine whether a line holds its recovery rate, and each stage has to hand a clean solution to the next.
Nov 13, 2026
Market News
Coperion has received a Letter of No Objection (LNO) from the U.S. Food and Drug Administration (FDA) for its high-density polyethylene (HDPE) and polypropylene (PP) recycling technology. The letter confirms that the combination of Coperion twin screw extruders and EcoFresh silo degassing used in the manufacture of rHDPE and rPP fulfills the requirements for direct contact with food.
Nov 12, 2026
Extrusion
The company builds modular co-rotating parallel twin-screw equipment with metering and feeding auxiliaries.
Nov 10, 2026
Recycling
WITTMANN expands the Primus product line with the new G-Max primus 13, a new blade granulator designed for particularly cost-efficient inhouse recycling of sprues and rejects.
Nov 9, 2026
Recycling
Polysmart Packaging Limited, one of the pioneers of food grade rPET recycling in Nigeria, opened its landmark $60-million food-grade PET recycling facility, which is also Nigeria’s largest plastic recycling plant.
Nov 9, 2026
Recycling
The company develops and manufactures green tire pyrolysis and carbon black deep-processing technology and equipment.
Nov 9, 2026
Share Your Choice
Facebook
X
Email