Log in
onclick="gourl('https://www.adsalecprj.com/en/auth/register.html')" v-if="!userInfo.id"> Register
Contact
{{userInfo.company_name_english||userInfo.truename_english}}
{{userInfo.phone||userInfo.email}}

Home Page

Member Center

Data Settings

Log out

 
Recycling

Starlinger PET bottle-to-bottle recycling technology for food-contact packaging circularity

May 23, 2025

Starlinger’s PET bottle-to-bottle recycling technology enables Thai plastic product manufacturer Royce Universal Co., Ltd. to produce post-consumer PET for food-contact packaging.


Starlinger_recoSTAR PET 165 HC iV+.jpg

recoSTAR PET 165 HC iV+ from Starlinger.

 

Royce has the capacity to recycle around 15,000 tons of post-consumer PET per year. In addition to rPET sheet produced from PET bottle flakes, Royce offers certified high-quality food-grade recycled PET pellets under the brand name “PetaRoyce”.

 

The company installed the recoSTAR PET 165 HC iV+ from Starlinger at its production site. The recycling line turns washed PET flakes into food-contact rPET pellets and has a production capacity of up to 1,800 kg/h.

 

The excellent decontamination capacity of Starlinger’s PET bottle-to-bottle recycling process has been approved by authorities such as FDA and EFSA.

 

Royce uses the food-contact rPET in its own sheet production and supplies it to brand owners and beverage producers for mineral water and soft drinks in Thailand as well as in the US, Australia and Japan.

 

 


Packaging
Recycling
Starlinger
Comments
Packaging
The patented technology covers solvent-based and water-based deinking primer technologies, while Siegwerk's broader deinking portfolio also includes solutions for UV printing applications.
Nov 5, 2026
Packaging
Avery Dennison is now the first manufacturer to offer an RFID solution recognized by both major regional bodies for compatibility with mechanical PET recycling streams.
Nov 5, 2026
Recycling
The Circular Resources and Recycling Expo (CRRE) recently spoke with Sidikat Folami, President of the Fashion and Textile Recycling & Upcycling Alliance (FTRUA).
Nov 4, 2026
Packaging
UPM Adhesive Materials plans to open its first factory in India in early 2028. Located in the state of Gujarat, the factory will feature an acrylic-based coating line for self-adhesive label materials.
Nov 4, 2026
Recycling
The company's competitive advantage is low-temperature extrusion combined with air-cooled hot-cut and air-cooled strand pelletizing, across single-screw, twin-screw, and complete recycling lines.
Nov 2, 2026
Automotive
This plan highlights a potential future business line even as the site faces possible closure from the early 2030s under the group's restructuring.
Oct 30, 2026
Share Your Choice
Facebook
X
Email