Log in
onclick="gourl('https://www.adsalecprj.com/en/auth/register.html')" v-if="!userInfo.id"> Register
Contact
{{userInfo.company_name_english||userInfo.truename_english}}
{{userInfo.phone||userInfo.email}}

Home Page

Member Center

Data Settings

Log out

 
Recycling

Rayfon Est: Complete recycling lines for oily, sand-laden mixed waste plastics

Oct 5, 2026

Clean PET bottles are the easy end of plastics recycling: mature collection chains, straightforward processing, reliable resale. Mixed household plastics, grease-coated takeout containers, sand-laden agricultural film, and packaging with chemical residue sit at the opposite extreme — high impurity loads, difficult cleaning, heavy material loss, and processing costs that leave little margin.

 

Equipment makers avoid these streams and recyclers decline them. Most recycling equipment is developed around clean, stable feedstock; on contaminated, mixed input, blade wear accelerates, decontamination and washing become unstable, material loss rises, and product quality falls.

 

Rayfon Est has focused on fine-grained solid-waste processing for over 17 years. Rather than avoid difficult feedstock, it works from the real conditions of complex input, delivering integrated solutions across process planning, equipment manufacturing, installation, and operator training.


Est_1_480.jpg

 

Complete lines by material

 

‧ PET bottles: mechanical or steam delabeling, then crushing, cap sorting, cold washing, steam hot washing, flotation rinsing, dewatering, drying, fine secondary crushing, and impurity sorting to baled recycled flake. Process flow, plant layout, and wastewater recirculation are designed per project.


‧ PP food containers: dedicated hot-wash equipment performs deep degreasing and immersive deodorizing at low energy use and low fines loss; the pellets feed thermoforming, injection molding, and fiber spinning.


‧ HDPE small hollow-ware and PP household mixed plastics: unpacking, crushing, decontamination, deep hot washing, dewatering, fine purification, and bagging, built around the company's own immersive continuous hot-wash machine and scraper-type separation tank. Silicone separation, density sorting, and material and color sorting yield feedstock that compounding plants can use directly for blow molding and corrugated pipe extrusion.


‧ PE film, PP woven bags, and PA airbag fabric: a modular line for crushing, washing, decontamination, dewatering, and drying, with a sand-removal system exceeding 99% and multi-stage sorting. The company states more than ten standardized configurations can cut operating costs by 20%.


Est_4_480.jpg


Est_6_480.jpg

 

Local adaptation

 

The decisive variable is not whether a process exists, but whether it fits the local feedstock: northern film carries more sand, southern woven bags more complex impurities, and urban containers more grease and odor.

 

Rayfon Est therefore runs an integrated research, production, sales, and service model rather than equipment sales alone. Feedstock, capacity, and finished-product targets are assessed and the process flow and plant layout designed before a project; the line is manufactured and delivered during it; on-site commissioning and operator training follow. Field problems feed back into R&D, driving the next round of equipment and process upgrades.

 

Domestic and overseas projects

 

‧ Hangzhou, Guizhou, Yunnan, and Jiangxi: soft woven-bag and ton-bag lines run in regular production. For high-sand feedstock, pre-sand removal and multi-stage sorting raise finished purity.


‧ Domestic recycling plants: PET flake, PP container, and HDPE hollow-ware lines run in continuous production.


‧ Malaysia: woven-bag and ton-bag lines are installed and in production.

 

Patents and delivery model

 

Rayfon Est and its affiliates hold multiple utility patents covering core equipment structures across the recycling process — film washing, dewatering, hot washing, and crushing. Each corresponds to a problem encountered in a real project, with on-site solutions standardized into equipment technology.

 

The company reports more than 3,000 cooperating customers and also supplies equipment for HW49/HW08/HW04 hazardous-waste packaging disposal and medical infusion bottle and bag recycling.

 

About the CRRE exhibitor

 

Rayfon Est is an environmental equipment manufacturer focused on fine-grained solid-waste processing and hazardous-waste resource recovery. Its core lines cover PET flake, PP food containers, HDPE small hollow-ware, PP household mixed plastics, LDPE soft film, PP flexible plastics, hazardous-waste packaging, and medical infusion bottles and bags, all available as non-standard custom solutions. Products are sold to more than 20 countries and regions.

 

Booth: B1C13

 

About CRRE


CRRE is positioned as a national-level platform, with deep integration across the whole chain and broad international collaboration. It adopts a “summit forum + physical exhibition” dual-engine model. It is committed to building the first five-in-one super hub for resource-circulation in the Asia-Pacific region, covering: recycling – reprocessing – high-value applications – green finance – international rules.


Preregistration:

https://reg.crre-expo.com/CRRE/visitor-registration/eng?Regsource=RAZ23777


CRRE
Plastics and rubber machinery and equipment
Recycling
Recycling line
Comments
Auxiliary
The company builds granulators for PET, PP, PLA, and PS sheet and cup trim, and works from the material rather than a standard model.
Nov 19, 2026
Market News
Co-funded by MIMIT, this project has led to the development and testing of a natural fiber dry molding technology, broadening the scope for the manufacture of sustainable, recyclable packaging solutions
Nov 16, 2026
Corporate News
On October 21, 2026, battenfeld-cincinnati, one of the world’s leading manufacturers of extrusion lines for plastics processing, officially marked the start of the comprehensive modernization of its Vienna site.
Nov 16, 2026
Recycling
The company builds equipment for waste rubber and plastics recovery. It supplies individual machines and complete configured lines.
Nov 16, 2026
Recycling
Mixing efficiency, sealing, corrosion resistance, and continuous operation determine whether a line holds its recovery rate, and each stage has to hand a clean solution to the next.
Nov 13, 2026
Market News
Coperion has received a Letter of No Objection (LNO) from the U.S. Food and Drug Administration (FDA) for its high-density polyethylene (HDPE) and polypropylene (PP) recycling technology. The letter confirms that the combination of Coperion twin screw extruders and EcoFresh silo degassing used in the manufacture of rHDPE and rPP fulfills the requirements for direct contact with food.
Nov 12, 2026
Share Your Choice
Facebook
X
Email