Vecoplan has developed the new “Hotspot Monitoring” thermal imaging system, an AI-Powered early fire detection for recycling facilities.

The bispectral thermal imaging camera monitors defined areas across a wide surface and provides both a thermal image and a camera image. If the temperature in a monitored zone exceeds defined limits, the system triggers an alarm.

Vecoplan’s new “Hotspot Monitoring” thermal imaging system.

The system monitors not only conveyor belts but also material flows, stockpiles, hoppers, and material supply lines. Since the sensor is installed outside the material flow, it is not subject to mechanical wear and is less prone to contamination.

AI analyzes to prevent false alarm

Conventional systems measure temperatures but do not provide context. As a result, heat generated by vehicles or exhaust fumes can be mistakenly interpreted as a fire source, even though it does not result from the monitored material reaching critical temperatures.

The AI-powered image recognition of “Hotspot Monitoring” can distinguish between these cases and prevent false alarms. The individual areas of the material supply line can be configured accordingly so that forklifts or wheel loaders do not trigger an alarm.

“Hotspot Monitoring” is integrated into the Vecoplan Smart Center (VSC) – Vecoplan’s digital platform for real-time data and remote access – and enables continuous temperature measurement within defined monitoring zones.

The system operates reliably even during internet outages, as it is linked to the VSC but does not depend on an internet connection.

A control unit processes the alarm and temperature signals, while the VSC.router handles the secure IT connection. This also enables remote support, such as when evaluating incidents. In the event of an alarm, the relevant personnel gain direct access to the system and can immediately review the incident.

Integrated system for recycling facilities

With “Hotspot Monitoring,” Vecoplan is closing a gap in early fire detection at recycling facilities. As a full-service equipment provider, the company covers the entire process from shredding to conveyor and screening technology to cleaning technology.

Thermal imaging technology fits seamlessly into this integrated system, reducing the number of interfaces for operators thanks to coordinated technology. The camera can also be easily retrofitted and integrated into various systems. In this way, Vecoplan combines thermal imaging technology, automation, and service into a single solution.