Log in
onclick="gourl('https://www.adsalecprj.com/en/auth/register.html')" v-if="!userInfo.id"> Register
Contact
{{userInfo.company_name_english||userInfo.truename_english}}
{{userInfo.phone||userInfo.email}}

Home Page

Member Center

Data Settings

Log out

 
Extrusion

OSD Machinery: Custom screw and barrel sets for abrasive, contaminated recyclate

Nov 20, 2026

The extruder is the heart of a pelletizing line, and it is where difficult recyclate does its damage. Sand, glass fiber, and mineral filler abrade the screw; aggressive and moisture-laden melts corrode the barrel; and the torque needed to plasticize a mixed, contaminated stream is higher than a general-purpose screw is designed to deliver.

 

The result is a familiar pattern in recycling plants: screws worn out ahead of schedule, uneven plasticizing, frequent stoppages, and line availability falling below what the capital investment assumed. A standard screw cannot simultaneously resist wear, resist corrosion, and deliver stable output across PP, PE film, woven bags, and rigid mixed plastics.

 

Zhoushan OSD Machinery Co., Ltd. (欧胜达) works at the component level rather than the whole line. Based in Zhoushan's screw and barrel manufacturing cluster, it develops, produces, and customizes twin- and single-screw extruders together with barrels, screw elements, and assemblies. It also offers screw and barrel redesign, reverse engineering from physical samples, and twin-alloy powder laser repair.

 

Custom screws and barrels

 

Screws and barrels are built to the customer's feedstock: material grade and flight configuration are selected against the material rather than taken from a standard range.

 

For highly abrasive recyclate — material carrying sand, glass fiber, or filler — a high-wear alloy coating extends the service life of the core components.

 

For light film and moisture-laden mixed scrap, the conveying, compression, and plasticizing sections are reconfigured to improve venting and devolatilization, reducing carbonized black specks and holding pellet appearance stable.


OSD_1_320.jpg

 

Standard barrel material is 38CrMoAlA alloy steel, through hardening and tempering, setting, nitriding or twin-alloy spray welding, precision grinding, and polishing — a route the company positions as an alternative to imported screws and barrels.

 

Applications cover PE agricultural film, PP woven bags, rigid mixed plastics, and glass-fiber reinforced recyclate, both as replacement components in existing pelletizing lines and as original fitment on new ones.

 

Single-screw recycling extruders

 

For melting, plasticizing, and filter extrusion ahead of the screen changer and pelletizer, with sufficient torque reserve for continuous long-run operation and straightforward maintenance. Suited to small and mid-size recycling plants processing film and rigid plastics.


OSD_2_380.jpg 

Twin-screw compounding lines

 

For combined recycling and compounding — filling, blending, and devolatilization — with controlled residence time and uniform mixing for higher-specification recycled and modified pellets.


OSD_3_350.jpg 

Case study: PP woven bag recycling

 

A woven-bag recycler was running feedstock carrying printing ink and dust. Screws wore out and required replacement roughly every three months, pellet color varied, quality was inconsistent, and production cost stayed high.

 

OSD Machinery specified a high-wear alloy screw and barrel matched to the contamination profile and re-optimized the compression ratio for woven-bag plasticizing.

 

The company reports component life improved by more than a factor of two, unplanned maintenance dropped markedly, and pellet consistency improved enough to strengthen the customer's position with downstream buyers.


OSD_4_480.jpg

 

Service scope

 

Work starts from feedstock testing rather than a catalogue: solution design, custom component manufacture, assembly and commissioning, and technical guidance. Beyond component customization and retrofit of ageing lines, the company matches extruder specifications to capacity, feedstock type, and plant layout, targeting the case where a plant wants to upgrade rather than replace its line.

 

About the CRRE exhibitor

 

Zhoushan OSD Machinery Co., Ltd. develops, manufactures, and exports single- and twin-screws, barrels, and related components for plastic machinery, with precision machining and a full inspection process. It supplies screw and barrel modification, sample-based reverse engineering, and twin-alloy powder laser repair, and exports to overseas markets.

 

Booth: B1C45


About CRRE


CRRE is positioned as a national-level platform, with deep integration across the whole chain and broad international collaboration. It adopts a “summit forum + physical exhibition” dual-engine model. It is committed to building the first five-in-one super hub for resource-circulation in the Asia-Pacific region, covering: recycling – reprocessing – high-value applications – green finance – international rules.

 

Preregistration:

https://reg.crre-expo.com/CRRE/visitor-registration/eng?Regsource=RAZ23777

 


CRRE
extrusion
Recycling
Barrel
Screw
Comments
Auxiliary
The company builds granulators for PET, PP, PLA, and PS sheet and cup trim, and works from the material rather than a standard model.
Nov 19, 2026
Market News
Co-funded by MIMIT, this project has led to the development and testing of a natural fiber dry molding technology, broadening the scope for the manufacture of sustainable, recyclable packaging solutions
Nov 16, 2026
Recycling
The company builds equipment for waste rubber and plastics recovery. It supplies individual machines and complete configured lines.
Nov 16, 2026
Recycling
Mixing efficiency, sealing, corrosion resistance, and continuous operation determine whether a line holds its recovery rate, and each stage has to hand a clean solution to the next.
Nov 13, 2026
Market News
Coperion has received a Letter of No Objection (LNO) from the U.S. Food and Drug Administration (FDA) for its high-density polyethylene (HDPE) and polypropylene (PP) recycling technology. The letter confirms that the combination of Coperion twin screw extruders and EcoFresh silo degassing used in the manufacture of rHDPE and rPP fulfills the requirements for direct contact with food.
Nov 12, 2026
Extrusion
The company builds modular co-rotating parallel twin-screw equipment with metering and feeding auxiliaries.
Nov 10, 2026
Share Your Choice
Facebook
X
Email