Log in
onclick="gourl('https://www.adsalecprj.com/en/auth/register.html')" v-if="!userInfo.id"> Register
Contact
{{userInfo.company_name_english||userInfo.truename_english}}
{{userInfo.phone||userInfo.email}}

Home Page

Member Center

Data Settings

Log out

 
Auxiliary

ENGEL digital process intelligence to achieve 95% Overall Equipment Effectiveness

Nov 18, 2026

ENGEL’s web-based iQ process observer supports BIC, a manufacturers of stationery, lighters, brushes and shavers in Athens, Greece, on process data analysis, deviation detection, and process optimization, enabling BIC to achieve a consistent 95% Overall Equipment Effectiveness (OEE).

 

ENGEL_iQ process observer - 複製.jpg

The web-based iQ process observer displays process data and deviations on screen. Illustrative image from an ENGEL production environment.

 

Maximizing engineering expertise in complex production environment

 

BIC operates around 180 injection molding machines across five business units in a large campus, with just five process engineers responsible for troubleshooting production issues and optimizing the molding process for all machines across the entire site.

 

ENGEL_BIC production - 複製.jpg

ENGEL_BIC production 02 - 複製.jpg

Shaver production at BIC in Athens: Around 180 injection molding machines are in use at the site. The web-based iQ process observer helps process engineers detect deviations early and respond where needed.

 

“Our challenge is maintaining full process transparency and reacting quickly so our engineering expertise can be focused where it creates the greatest value,” explained Yiannis Voultzatis, Molds and Injection Molding Process Industrialization Senior Manager, who is leading the project at BIC.

 

iQ process observer web for live operation monitoring

 

Since September 2024, BIC has been using the iQ process observer web to monitor around 30 machines in live operation.

 

At the heart of the platform are the Process Notes: AI-generated recommendations automatically derived from the collected machine data. They continuously evaluate process behavior, detect patterns, deviations and trends, and provide clear, understandable guidance.

 

ENGEL_iQ process observer_screenshot - 複製.jpg

The Process Notes in the iQ process observer highlight deviations and suggest specific checks – here, in response to an extended mold pause time. The screenshot shows an ENGEL application example.

 

OEE consistently reaches 95%

 

While BIC’s Overall Equipment Effectiveness (OEE) previously ranged between 91 and 92%, it has now consistently reached 95% for over a year, using iQ process observer web in combination with other ENGEL solutions such as authentig, iQ weight and iQ clamp control.

 

Early detection of quality risks prevents scrap before it occurs. Reduced downtime and stabilized cycle times further contribute to increased efficiency.

 

Testing for two-component injection molding

 

Building on the success with one-component (1K) machines, BIC is currently testing the use of the iQ process observer in more complex two-component (2K) injection molding processes.

 

The goal is to monitor both components simultaneously, apply the same AI logic to new process parameters, and close remaining transparency gaps. Initial results are promising, and a broader rollout is planned.

 

Intelligence assistance adds value in digitalized manufacturing operations

 

The success at BIC’s manufacturing operations demonstrates how digitalization works in practice and delivers real added value through intelligent assistance. The AI-based iQ process observer provides in-depth analysis of machine behavior and relieves scarce process expert resources by delivering prioritized, actionable insights.

 

As a result, it makes large machine fleets actually manageable with limited resources. At BIC, it has helped process engineers to stop relying on intuition and make data-driven decisions, leading to faster response to process issues and thereby helping to achieve a sustainable OEE of 95 % in a highly complex production environment.


AI
Injection molding machines
Industry 4.0
ENGEL
Comments
Market News
On November 7-8, Topstar held TOPS DAY 2026, bringing together industry partners to explore practical applications of industrial embodied intelligence and uncovering new opportunities across the AI ecosystem.
Nov 11, 2026
Automotive
Tederic is expanding its presence in Brazil’s automotive components market with its first NEO·M1920v three-color injection molding machine at a former Valeo automotive lighting plant.
Nov 3, 2026
Packaging
Husky Technologies announced capacity expansion at its Shanghai Manufacturing Center of Excellence and the global introduction of HyCAP PRO, its injection molding system for high-output beverage closure.
Oct 29, 2026
Automotive
Tederic delivered its first large-scale overseas project in the automotive lighting sector at the Thailand plant of Varroc, a leading Indian automotive components manufacturer.
Oct 28, 2026
Corporate News
Evosys has successfully relocated its central IT infrastructure to certified data center in Nuremberg, Germany, providing necessary capacity to reliably support digitalization and planned company growth.
Oct 27, 2026
Recycling
Used lithium batteries pass through dismantling, crushing, drying or pyrolysis, screening, and sorting. Rik Tech combines these into one line.
Oct 26, 2026
Share Your Choice
Facebook
X
Email